Product Overview

These professional quality anodizing dyes provide consistent, quality results. The same dyes are sold to professional anodizing shops all over the world. 4 floz US (118ml) of dye concentrate makes 7.4 Litres

These colors are approximate. The finish will normally have a more 'metallic' look, and will vary slightly depending on the alloy and surface preparation.

Procedure for Obtaining Dyed Anodize

Anodize the aluminum at 15-25°C for 90 minutes at 4.5 amps per sq foot or 0.03 amps per sq inch. Use our Anodizing Kit.

After thorough rinsing, immerse the part in the dye at a temperature of 60°C for 15 minutes.

Finally, seal by hanging the part in a sealer bath for 15 minutes.

SHIPPING INFORMATION

Please note that our shipping prices are a higher than it would cost to send a normal parcel via the post, the reason for this is because any product that contains chemicals must be sent and packed as per the "hazardous goods" regulations, and be transported by a carrier that is licensed to be able to transport. we are unable to send by regular post as it is now a criminal offence to send undeclared hazardous goods.