For Mild Steel

WHAT CHEMICAL DO YOU NEED TO BLACKEN MILD STEEL

Blackened Mild steel is used for 2 industries, the first is for Engineering, There are many products from nuts and bolts, gate hinges, up to engine components that are chemically blackened, to carry out this process you will need 4 products.
1. Degreaser to prepare the metal 2. Conditioner to "relax" the metal and help it absorb the black 3. Chemical Blackener 4: De Watering Oil to seal the Chemical Black into the metal.

This process is typically carried out by diluting the products in to buckets or tanks, and dipping the metal to create an even black finish that is hard wearing.  

All the products on this page are for creating a decorative appearance on any items from small objects through to stair cases, desks, restaurant furniture, the list is endless, the process for this is very different from the engineering Process.
Rather than dipping the metal, you apply it by hand, 1. Degrease or clean the metal, removing any mill scale, grease etc 2: Apply Metal Blackener undiluted using a small abrasive scotch brite pad and work it in to the metal, 3. Seal the Blackener in to the metal, depending on the effect you need you can use either a beeswax if you would like an aged Industrial look, Our Metal Sealer if you need a satin Appearance. or if its going to be used outside a heavy duty clearcoat lacquer.

There are no products listed under this category.